The set of standards used for certification and their publishing date is specified by the report to the certificate. The following list represents a compilation of the most generic standards only.

[N1] DIN V 19250 "Fundamental safety aspects for measurements and control equipment"

Safety requirements according to [N1] RC 8 - highest requirements

[N3] abd [N4.n]:RC 1 - lowest requirements

[N2] IEC 61508 "Functional safety of electrical / electronic / programmable electronic systems (PES)"

part 1 to 7 (2000)

Safety requirements according to [N2] SIL 4 - highest requirements

SIL 1 - lowest requirements

[N3]DIN 19251 "MC Protection Equipment"

[N4.1] DIN V VDE 0801 "Principles for computers in safety-related systems"

[N4.2] DIN V VDE 0801 Amendment A1

[N5] DIN VDE 0116 "Electrical Equipment for Furnaces"

[N6.1] DIN VDE 0160 "Electronic Equipment used in Electrical Power Installations" (corresponds to prEN 50178)

DIN VDE 0110 "Insulation co-ordination for equipment within low-voltage systems; Fundamental requirements" part 1

 

[N6.2] EN 61131 "Programmable Controllers"

Part 1; "General Information"

Part 2; "Equipment requirements and tests"

[N7.1] prEN 50082-2 "Electromagnetic compatibility (EMC); Generic immunity standard Part 2: Industrial environment"

[N7.2] EN 50081-2 "Electromanetic compatibility (EMC); Generic emission standard - Part 2: Industrial environment"

EN 55011 "Limits and methods of measurement for radio disturbance characteristics of ISM radio frequency equipment", severity: limit class A

[N8] DIN IEC 68 / DIN EN 60068 "Basic testing procedures", set of standards

Part 2-1 / Cold

Part 2-2-A / Dry heat

Part 2-3 / Dump heat, steady state

Part 2-6 / Vibration, sinusoidal

Part 2-27 / Shock